Electrician in New Westminster, BC
Panel and service upgrades, EV chargers, heat pump circuits, knob-and-tube and aluminum wiring, suite and laneway wiring, and repairs across New Westminster. One licensed electrical contractor, who looks at the panel before quoting, pulls the permit and coordinates the New Westminster Electric Utility side.
New Westminster is one of the oldest cities in western Canada, and its houses show it. Queen's Park is full of heritage homes from the late 1800s and early 1900s, many with knob-and-tube still in the walls, and Sapperton, the West End and Brow of the Hill have streets of older houses, many converted into suites, alongside walk-up apartments. Across the river, Queensborough on the eastern tip of Lulu Island is newer, flatter and wetter. One thing sets New West apart from every neighbouring city: electricity here comes from the City's own utility, New Westminster Electric Utility, not BC Hydro, so service upgrades and new connections are arranged with the City. This line reaches one licensed electrical contractor working across New Westminster who quotes after seeing the panel, pulls the permit and deals with the utility.
Electrical Work We Take On in New Westminster
Panel and service upgrades, Level 2 EV chargers, heat pump and air conditioning circuits, knob-and-tube and aluminum wiring remediation, secondary suite and laneway home wiring, and electrical repairs. Houses, suites, townhouses and strata units.
Panel & Service Upgrades
Fuse panels and full 100-amp panels replaced, services upgraded to 200 amps where the load calls for it, with the permit and the New Westminster Electric Utility side handled.
Learn more →
EV Charger Installation
Level 2 home chargers in garages, driveways and strata parkades, sized to your panel with a load calculation and load management where it saves a service upgrade.
Learn more →
Knob-and-Tube & Aluminum Wiring
Assessment and a written plan for knob-and-tube and aluminum branch wiring, then staged or full rewiring, or rated aluminum connections, under permit.
Learn more →
Heat Pump & AC Circuits
Dedicated circuits for heat pumps, mini-splits and air conditioning, with a load calculation first so the panel can carry it, and coordination with the HVAC installer.
Learn more →
Suites, Laneway Homes & Renos
Wiring for basement suites, laneway and garden homes, kitchens, bathrooms and basements, starting with whether the service can carry a second household.
Learn more →
Electrical Repairs & Troubleshooting
Breakers that keep tripping, dead outlets, flickering lights, warm switches and storm or water damage, traced to the cause and repaired properly.
Learn more →
Electrical Work in New Westminster: Panels, Permits and Old Wiring
Heritage houses and careful rewiring. Rewiring a heritage house is slower than rewiring a 1970s one, and it should be. Plaster and lath walls, original trim and finished ceilings mean new circuits are fished through with small, planned openings, often from the attic and basement. Knob-and-tube is assessed first to find what is still live and what has been spliced into later circuits. Changes to the outside of a heritage-protected house, such as a new service mast or meter location, may need the City's heritage review, so that is raised before the plan is final.
Knob-and-tube, aluminum and the insurance question. Two kinds of older wiring come up again and again in Lower Mainland houses. Knob-and-tube, the original cloth-insulated wiring on porcelain knobs, is found in houses built before about 1950; it has no ground, it was never meant to be buried in insulation, and decades of splices often hang off it. Aluminum branch wiring was used in some houses built from the mid-1960s to the late 1970s; the wire itself is not the problem so much as its connections, which loosen and heat up at receptacles, switches and breakers if they were not made with rated devices. Many insurers ask about both at renewal or when a house is sold. Neither always means a full rewire, but both need a proper assessment and a written plan.
Permits, Technical Safety BC and who can do the work. In BC, electrical contractors are licensed through Technical Safety BC, and most electrical work beyond like-for-like replacement needs a permit and an inspection. Depending on the municipality, the permit comes from Technical Safety BC or from the city's own permit office; the contractor knows which applies at your address and applies for it. A permit protects you when you sell, when you claim on insurance and when a future electrician opens the panel. A quote that says the permit is optional, or a contractor who asks you to take out the permit in your own name, is a reason to look elsewhere.
New Westminster Electric Utility and service upgrades. Unlike its neighbours, New Westminster runs its own electric utility. Electricity here is supplied by New Westminster Electric Utility, part of the City, not by BC Hydro. Service upgrades, disconnects and reconnects, meter moves and new services for laneway homes are arranged with the City's utility, which has its own requirements and scheduling. Programs and rebates offered to BC Hydro customers may not apply in the same way here, so check with the City before counting on one. The contractor deals with the utility directly as part of the job.
Heat pumps, EV chargers and the 100-amp panel. Heat pumps, Level 2 EV chargers, induction ranges and suites all add load, and many houses here still run on a 100-amp service. Before anyone sells you a panel upgrade, a load calculation to the Canadian Electrical Code as adopted in BC shows what the service can actually carry. Sometimes the answer is a new 200-amp service; sometimes a load management device lets an EV charger share capacity without one. Heat pump rebates are listed by CleanBC Better Homes; programs change, so confirm there before counting on any amount.
Older multi-unit houses and walk-ups. Many New Westminster houses were split into suites decades ago, and many walk-up apartment buildings are now stratas. That means shared services, small unit panels and old wiring that nobody has mapped. Work inside a unit is usually the owner's to arrange; anything touching shared electrical rooms, common areas or the parkade needs the strata or building owner first. EV charging in these buildings usually depends on load management.
Serving New Westminster & Surrounding Areas
- New Westminster
- Queen's Park
- Sapperton
- Uptown & Brow of the Hill
- Queensborough
Electrical contractor licensing and electrical permits are administered by Technical Safety BC, except where a municipality issues its own permits. Electricity in New Westminster is supplied by New Westminster Electric Utility. Heat pump and home energy rebates are listed by CleanBC Better Homes. WorkSafeBC requires a hazardous materials survey before renovation work on buildings built before 1990. Permit questions for your address go to City of New Westminster.
Frequently Asked Questions
Do I need a permit for electrical work in New Westminster?
For most work beyond replacing a fixture, receptacle or switch like for like, yes: new circuits, panel and service upgrades, EV chargers, hot tubs, suites and renovations. The contractor applies for it and arranges the inspection.
How do I know if I need a panel upgrade?
A load calculation tells you, not the age of the panel alone. Common signs are a 60- or 100-amp service with no spare spaces, breakers that trip under normal use, a fuse panel, or plans for a heat pump, EV charger or suite.
Does knob-and-tube have to be removed?
Not always all at once, but it should be assessed, and insurers often require a plan. Live knob-and-tube that has been buried in insulation or spliced into newer circuits is usually the first part to go.
Can I put an EV charger on my existing panel?
Often, yes, with a load calculation and sometimes a load management device. If the panel is full or the service is small, the contractor shows you the options and their costs side by side.
How much does an electrician cost in New Westminster?
It depends on the job. Planning ranges are on the cost page. Every job is quoted in writing after the electrician has seen the panel and the work.
Do you work in condos and townhouses?
Yes. Work inside your unit is usually yours to arrange; anything on common property, including most parkade EV chargers, needs strata approval first, and the contractor can provide what the strata asks for.
Is this an electrical company?
This is a booking line for one licensed electrical contractor working across New Westminster. Your request goes to that contractor, not to a list or a call centre.
Ready to Get Started?
Call 778-900-8926 or send the form for a written quote for electrical work in New Westminster.